How to Check if Your VPN Is Working
On this page
- How do you check if your VPN is working in three steps?
- How do you check your IP address and location?
- How do you check for a DNS leak?
- How do you check for a WebRTC leak?
- How do you check for an IPv6 leak?
- How do you check that the kill switch is on?
- Where does your device show that the VPN is connected?
- What should you do if a check fails?
- FAQ
- Related guides
A VPN app that says “Connected” is a good sign, but it does not prove that everything you do online goes through the VPN. The checks below show what websites and your internet provider can actually see. Each one takes a few minutes, needs no technical skill, and is worth repeating after you install a new app, change a setting or update your browser.
How do you check if your VPN is working in three steps?
Do these in order. The first check tells you whether the VPN is on at all; the other two look for gaps that a “Connected” screen does not show.
- Compare your IP address. Open our IP address checker with the VPN off and note the address and country. Connect the VPN, reload the page and look again. You should now see a different address, in the country of the server you picked.
- Run the WebRTC test. With the VPN still connected, run the WebRTC test on the same page. It should not find a public address that differs from the one websites see.
- Run a DNS leak test. Open a DNS leak-test page with the VPN connected and run its test. The servers it lists should belong to your VPN provider, not to your internet provider.
If all three look right, your VPN is doing its main job. The sections below explain each result in more detail, what to do when one looks wrong, and how to check IPv6 and the kill switch.
How do you check your IP address and location?
Your public IP address is the address every website sees when you connect. Without a VPN, it belongs to your internet provider. With a VPN connected, it should belong to the VPN server instead.
Open the IP address checker twice: once with the VPN off and once with it on. The page can save the first result so you can see both side by side.
What does a normal result look like?
With the VPN on, the IP address is different from the one you saw with it off. The country matches the server you chose in the VPN app, and the network shown is no longer your internet provider. The city can be wrong or far from the server’s city. IP locations come from databases, not GPS, so a wrong city on its own is not a problem.
What does it mean if nothing changed?
If the address and network are the same with the VPN on and off, your traffic is not going through the VPN. Check that the app really says it is connected, then reload the page, because the browser may have shown an older result. If nothing changes after a reconnect, see what to do if a check fails.
If the address changed but the country is not the one you picked, the database behind the checker may place that server somewhere else. Try another server in the same country and check again.
How do you check for a DNS leak?
Before your browser can open a website, it asks a DNS server to turn the site’s name into an address. While the VPN is on, those lookups should go through the VPN too. A DNS leak happens when they go to your internet provider’s DNS servers instead. Your IP address can look right while your provider still sees the names of the sites you visit.
To check, open a DNS leak-test page with the VPN connected and run its test. The page lists the DNS servers that answered your lookups, usually with the network that runs each one.
What does a DNS leak look like?
A normal result lists servers run by your VPN provider, or by a DNS service the VPN app says it uses. A leak looks like this: one or more servers in the list belong to your own internet provider, or sit in your own country when you are connected to a server elsewhere. Run the test with the VPN off once, so you know what your provider’s servers look like.
How do you fix a DNS leak?
Try these, and run the test again after each one:
- Turn on the app’s DNS protection. If your VPN app has a DNS setting, such as DNS leak protection, check that it is on.
- Remove custom DNS servers. If you typed DNS server addresses into your device or router settings, they can take priority over the VPN’s. Set them back to automatic while you test.
- Reconnect. Disconnect the VPN, connect again and repeat the test.
- Ask your VPN provider. If the leak stays, the provider’s support team can tell you which setting its app uses for DNS on your device.
How do you check for a WebRTC leak?
WebRTC is the browser feature behind video calls in a web page. It can tell a website an IP address that your VPN is meant to hide. The test is in your browser, so run it in each browser you use.
Our guide on how to stop WebRTC leaks has the test, explains what each result means and shows which settings Firefox, Brave, Chrome, Edge and Safari offer. The same test also sits on the IP address checker page.
How do you check for an IPv6 leak?
Many internet connections have two kinds of public address: IPv4, written as four groups of numbers separated by dots, and IPv6, a longer address with letters and numbers separated by colons. If your VPN handles only IPv4, a site that reaches you over IPv6 can still see your real address.
Open the IP address checker with the VPN off and note which kind of address it shows. Then connect the VPN and check again. If the page still shows an IPv6 address from your internet provider while the VPN is connected, that is an IPv6 leak.
To fix it, look in the VPN app for an IPv6 setting, such as IPv6 leak protection, and turn it on. If the app has no such setting, ask the provider how it handles IPv6 on your device.
How do you check that the kill switch is on?
A kill switch stops your internet traffic if the VPN connection drops, so nothing goes out over your normal connection by accident. It only helps when it is switched on.
Open the VPN app’s settings and look for the kill switch. If you cannot find it, check the provider’s help pages, because apps do not all use the same name. Make sure it is on for each device you use, because each app on each device has its own settings.
If your connection keeps dropping, see why a VPN keeps disconnecting for the fixes to try.
What does always-on VPN do on Android?
Android has its own setting that keeps a VPN connected. Google’s help page lists it as Always-on VPN, under Settings, then Network & internet, then VPN, in the settings of the VPN you want to change. Google says that if you set up a VPN through an app, you won’t have the always-on option, so for most VPN apps the app’s own kill switch is the setting to check. When an always-on connection stops working, Android shows a notification that stays until you reconnect.
As described by Android Help (support.google.com/android/answer/9089766), read on .
Where does your device show that the VPN is connected?
Your VPN app shows its own connection status. The system can show it too, which is handy when the app is closed or hidden. Here is where each system’s maker says to look. The names of menus can differ slightly between system versions.
How do you see it on Windows?
Microsoft says that on the VPN settings page, under Settings, then Network & internet, then VPN, the VPN connection name shows Connected underneath it. On the taskbar, a blue shield appears when you are connected to a recognized VPN. You can also select the Network icon at the far right of the taskbar and see if the VPN connection says Connected.
As described by Microsoft Support (support.microsoft.com/en-us/windows/connect-to-a-vpn-in-windows-3d29aeb1-f497-f6b7-7633-115722c1009c), read on .
How do you see it on a Mac?
macOS has a VPN status menu in the menu bar. Apple’s help page says you turn it on in System Settings, under Menu Bar, by switching on the VPN option. The option may not appear if no VPN is set up on the Mac. From the menu you can connect or disconnect, and choose Show Time Connected or Show Status While Connecting to see more detail.
As described by Mac User Guide (support.apple.com/guide/mac-help/vpn-status-menu-bar-mac-mchl7f06ab80/mac), read on .
How do you see it on an iPhone?
Look at the status bar at the top of the screen. Apple’s list of iPhone status icons describes the VPN icon this way: “iPhone is connected to a network using VPN.” If the icon is missing while your VPN app says it is connected, reconnect and look again.
As described by Apple Support (support.apple.com/en-us/118203), read on .
How do you see it on Android?
Google’s help page says that when you’re connected, you’ll see a VPN icon. You can also open Settings, then Network & internet, then VPN, to see your VPNs. Google notes that if you cannot find that menu, you can search the settings for “VPN”, or get help from your device manufacturer, and that some steps only work on newer Android versions.
As described by Android Help (support.google.com/android/answer/9089766), read on .
What should you do if a check fails?
Start with the simplest fix and run the check that failed again after each step, so you know which one helped.
- Reconnect. Disconnect the VPN, connect again and repeat the check. Sometimes a fresh connection is all it takes.
- Try another server. Pick a different server, in the same country if location matters to you, and check again. If the result is fine on one server and wrong on another, the problem is with that server.
- Update the app and your system. Install any update for the VPN app, your browser and your device, then check again.
- Turn on the protection settings. Make sure the kill switch, DNS leak protection and any IPv6 setting in the app are on, then repeat the IP, DNS and WebRTC checks.
- Fix the browser. If only the WebRTC test fails, change the setting for your browser as described in how to stop WebRTC leaks, then run the test again.
- Ask your VPN provider. If a check still fails, send the provider’s support team the result you see. Its app may need a setting that differs on your device.
If the VPN shows connected but websites will not load at all, see VPN connected but no internet.
FAQ
Why does the IP check show the wrong country?
IP locations come from databases that match networks to places, and they can place a VPN server in a different country from the one the app names. Try another server in the country you want and check again. If the wrong country keeps showing up, ask your VPN provider about that server.
What is a DNS leak?
A DNS leak happens when the lookups that turn site names into addresses go to your internet provider’s servers instead of through the VPN. Your IP address can look correct while your provider still sees which sites you visit. A DNS leak-test page shows which servers answered your lookups.
Can a free VPN leak?
Any VPN can leak, free or paid, depending on how its app is set up on your device. Look in the app for DNS leak protection and a kill switch, and check that they are on. Then run the checks on this page to see what your own setup shows.
How often should you check your VPN?
Check when you first set it up, after you install an update for the app, your browser or your device, and whenever you change a setting. A quick IP check before anything sensitive also helps, because a connection can drop without you noticing.
Does passing every check make you anonymous?
No. These checks show that websites and your internet provider see the VPN instead of your own connection. Websites can still recognize you when you sign in, through cookies, or from details your browser shares.