VPN Keeps Disconnecting? How to Fix It
On this page
This guide is for a VPN connection that keeps dropping: the app falls back to “Connecting”, shows a disconnect notice, or turns off while your phone is asleep. Each cause below comes from the help pages of system makers or VPN providers, with the page named under it. The fixes start with quick checks, and the last sections cover each device and what the major VPN apps’ own help pages suggest.
Why does a VPN keep disconnecting?
VPN providers’ help pages name the same few causes again and again. Most of them sit on your device or your network rather than in the VPN itself, which is good news: you can usually fix them in the settings.
Does switching between Wi-Fi and mobile data drop the VPN?
Switching networks can drop the VPN. ExpressVPN’s help page says some mobile devices automatically switch to mobile data when they detect an unstable Wi-Fi network, and that “the constant switching between connection methods may lead your VPN connection to drop.” PureVPN’s Android help page describes the same thing. Both suggest turning off the phone’s automatic network-switching setting, such as Wi-Fi Assist on an iPhone.
As described by ExpressVPN Support (www.expressvpn.com/support/troubleshooting/vpn-always-disconnecting/), read on .
As described by PureVPN Support (support.purevpn.com/en_US/purevpn-android-troubleshooting/purevpn-android-troubleshooting), read on .
Can battery saving close the VPN app?
Yes, mostly on Android. Proton VPN’s help page explains that many Android device makers close apps that run in the background to make the battery last longer, and that this can happen to the VPN app, “causing your VPN to disconnect.” Google’s own Android help says that when Battery Saver is on, it limits or turns off background activity, so network connections and apps may experience delays.
As described by Proton VPN Support (protonvpn.com/support/android-killing-proton-vpn), read on .
As described by Android Help (support.google.com/android/answer/7664692), read on .
Can the protocol or the server cause drops?
Both can. ExpressVPN lists poor connectivity at the chosen server location among the likely causes, and Surfshark notes that the server you are on may be under maintenance. PureVPN’s help page says the protocol type “affects the performance and stability of your connection.” Each provider in the brand section below suggests trying another protocol, or the automatic option, when the connection keeps dropping.
As described by ExpressVPN Support (www.expressvpn.com/support/troubleshooting/vpn-always-disconnecting/), read on .
As described by Surfshark Help Center (support.surfshark.com/hc/en-us/articles/360010710460-How-to-fix-unstable-connection-issues-on-Windows), read on .
As described by PureVPN Support (support.purevpn.com/en_US/purevpn-android-troubleshooting/purevpn-android-troubleshooting), read on .
Can a router, firewall or antivirus cut the connection?
Yes. ExpressVPN lists interference from antivirus or online security apps as a likely cause. Surfshark’s Android help names anti-virus software, other VPNs, firewalls and file-sharing apps as apps that can interfere with a VPN connection. On the router side, Surfshark says some network providers switch on security features by default, such as parental controls or “Safe DNS”, and that these can cause unstable connections. Both ExpressVPN and Surfshark also mention restrictions applied by your internet provider.
As described by ExpressVPN Support (www.expressvpn.com/support/troubleshooting/vpn-always-disconnecting/), read on .
As described by Surfshark Help Center (support.surfshark.com/hc/en-us/articles/360009860539-How-to-fix-unstable-connection-issues-on-Android), read on .
As described by Surfshark Help Center (support.surfshark.com/hc/en-us/articles/360010710460-How-to-fix-unstable-connection-issues-on-Windows), read on .
How do you fix a VPN that keeps disconnecting?
Work through these in order and keep the VPN connected for a while after each step, so you can tell which one helped.
- Check your connection without the VPN. Disconnect the VPN and open a few websites. If they load normally, the drops come from the VPN side, so carry on. If they do not, the problem is your internet connection, not the VPN.
- Update the VPN app. Install the latest version from the provider, then reconnect. Check that the version number in the app’s settings has changed.
- Connect to another server. Pick a different server, or the one the app recommends. If the drops stop, the first server may have had a temporary problem, and the provider’s support team can look into it.
- Change the protocol. Open the app’s settings and try another protocol, or set it back to the automatic option. Stay connected for a while on each one and note which stays up.
- Lift battery limits on your phone. On Android, set the VPN app’s battery setting to “Unrestricted” or turn off battery optimization for it. On any phone, turn off battery-saving mode while you test, then lock the screen and check that the VPN is still on when you unlock it.
- Add the VPN to your antivirus or firewall exceptions. Turn the security app off briefly and connect. If the VPN now stays connected, turn the security app back on and add the VPN app as an exception.
- Close other VPN apps and try another network. Quit any other VPN on the device, then switch to a different Wi-Fi network or mobile data. If the drops stop on the new network, the old one is the cause.
- Contact your VPN provider. If the drops continue, send the provider’s support team what you tried. Some apps can send diagnostic information from their help menu.
A kill switch does not stop drops, but it keeps your traffic from leaving over your normal connection while the VPN reconnects. To see whether it is on, and to check that the VPN is working again after a fix, use our guide on how to check if your VPN is working.
How do you stop VPN drops on each device?
The settings that matter differ by system. Here is what each system maker’s help pages say about the settings involved. Menu names can differ slightly between system versions.
How do you stop drops on Windows?
On Windows, the VPN providers’ help pages point first to the antivirus, other VPN apps and the network (see NordVPN and Surfshark below). If the VPN drops only on battery, the power settings are worth a look too, although Microsoft does not tie them to VPNs. Microsoft says energy saver “automatically manages system processes and power usage.” Some apps also let you manage background activity: go to Settings, then System, then Power & battery, then Battery usage, choose More options next to the app, then Manage background activity, and change the setting for Let this app run in the background.
As described by Microsoft Support (support.microsoft.com/en-us/windows/experience/power-battery/battery-saving-tips-for-windows), read on .
How do you stop drops on a Mac?
ExpressVPN lists a VPN that disconnects when your device is in sleep mode as one form of this problem. On a Mac, the sleep settings are in System Settings: on a laptop, choose Battery and then Options; on a desktop Mac, choose Energy. Apple lists options there such as Prevent automatic sleeping on power adapter when the display is off on a laptop, and Wake for network access.
As described by Mac User Guide (support.apple.com/guide/mac-help/set-sleep-and-wake-settings-mchle41a6ccd/mac), read on .
As described by ExpressVPN Support (www.expressvpn.com/support/troubleshooting/vpn-always-disconnecting/), read on .
How do you stop drops on an iPhone?
Apple says Low Power Mode “reduces background activity to extend battery life,” and that it turns off Background App Refresh, among other features. Apple does not mention VPNs, but if the VPN drops only while Low Power Mode is on, turn it off in Settings, then Battery, and test again. If the drops happen when you move between Wi-Fi and mobile data, try turning off Wi-Fi Assist, as described in the network-switching section above.
As described by Apple Support (support.apple.com/en-us/101604), read on .
How do you stop drops on Android?
Battery settings are the usual suspect on Android. Google’s battery help page lists restricting apps with high battery use and adaptive battery among the settings your device may have, and says Battery Saver limits or turns off background activity. Open the VPN app’s battery settings and choose the option that does not restrict it, such as “Unrestricted”, as the providers in the Proton VPN and ExpressVPN entries describe.
Android also has an Always-on VPN setting, under Settings, then Network & internet, then VPN. Google says that if you set up a VPN through an app, you won’t have the always-on option, and that if an always-on connection stops working, you’ll get a notification that stays until you reconnect.
As described by Android Help (support.google.com/android/answer/7664692), read on .
As described by Android Help (support.google.com/android/answer/9089766), read on .
What do VPN providers’ help pages suggest?
Listed A to Z, not ranked. Each entry sums up only what that provider’s own help pages say.
CyberGhost
CyberGhost’s help page on connection drops explains what its Kill Switch does: if the VPN connection drops unexpectedly, it blocks internet traffic so that your real IP address, location and other data are not exposed outside the VPN tunnel. While the VPN is down, browsing, streaming, downloads and calls are interrupted, and traffic flows normally again once the VPN reconnects. If you disconnect on purpose, the Kill Switch does not apply and your connection goes back to normal.
As described by CyberGhost Support Center (support.cyberghostvpn.com/hc/en-us/articles/214387805-What-Happens-If-a-VPN-Connection-Drops), read on .
ExpressVPN
ExpressVPN’s help page for a VPN that keeps disconnecting starts with a check that your internet works with the VPN off. It then suggests updating the app, connecting to another server location and changing the protocol. It recommends the Automatic protocol option, which is the default, and lists the other protocols to try if that fails. For phones, it covers turning off battery optimization on Android and network-switching settings on iPhone and Android. It also suggests adding the app as an exception in your antivirus, and the app can send diagnostic information to the support team.
As described by ExpressVPN Support (www.expressvpn.com/support/troubleshooting/vpn-always-disconnecting/), read on .
IPVanish
IPVanish’s help page on sudden disconnections names three kinds of cause: losing the connection to the VPN server, problems with your internet provider and problems with the app. Its fixes, in order: switch to another server with a lower load or closer to you, change the tunneling protocol, check that your internet works without the VPN and try another connection such as a mobile hotspot or public Wi-Fi, do a clean reinstall of the app, and check that your operating system version is supported and update it. If the VPN stays connected on another network, it suggests contacting your internet provider.
As described by IPVanish Support (support.ipvanish.com/hc/en-us/articles/360004232874-Why-does-the-VPN-suddenly-disconnect), read on .
NordVPN
NordVPN’s help page for Windows lists the symptoms as the app’s status changing to “Connecting” or a notification that NordVPN has disconnected. It suggests updating the app, putting NordVPN on your antivirus’s exclusions list, setting the protocol to “Auto (Recommended)”, turning off post-quantum encryption and connecting to an obfuscated server. It also describes a network reset from the app’s diagnostics, and notes that this resets saved Wi-Fi networks and passwords. Further tips: check for other VPNs running on the computer, and see whether other devices on the same network have the problem.
As described by NordVPN Help Center (support.nordvpn.com/hc/en-us/articles/35251060899473-NordVPN-keeps-disconnecting-on-Windows), read on .
PIA
PIA’s help page on connections that drop frequently names network restrictions, server issues and incompatible VPN settings as possible causes, and asks you to make sure the app is up to date first. Its steps, in order: try a different Wi-Fi network or a mobile hotspot, connect to another server (a nearby one, or the automatic choice), reinstall the app, change the protocol, transport type and port, turn on the Small Packets option, exclude PIA from your antivirus or firewall and turn off other VPN apps or proxy browser extensions, try Multi-Hop on desktop, and finally send debug logs to its support team.
As described by PIA Support (helpdesk.privateinternetaccess.com/hc/en-us/articles/46770720470299-Trouble-Connecting-or-the-Connection-Drops-Frequently), read on .
Proton VPN
Proton VPN’s help page on Android explains that many device makers close background apps to save battery, which can disconnect the VPN. It suggests uninstalling third-party battery saver apps or excluding Proton VPN from them, and setting the app’s battery usage to Unrestricted in the Android settings. Its general connection help suggests trying a different server, trying a different protocol, and checking whether your firewall or antivirus blocks the app.
As described by Proton VPN Support (protonvpn.com/support/android-killing-proton-vpn), read on .
As described by Proton VPN Support (protonvpn.com/support/vpn-connection-problems), read on .
PureVPN
PureVPN’s help page on frequent disconnections gives the same advice for Windows, Mac, Android and iOS: connect to the recommended server, switch between servers, and switch the protocol. Its Android troubleshooting page adds that it recommends the automatic protocol, suggests testing the other protocols one by one if that does not work, and suggests turning off the phone’s automatic switch from Wi-Fi to mobile data.
As described by PureVPN Support (support.purevpn.com/vpn-errors/how-to-solve-unstable-connection-disconnection-issue-lag-in-connection-frequent-disconnections), read on .
As described by PureVPN Support (support.purevpn.com/en_US/purevpn-android-troubleshooting/purevpn-android-troubleshooting), read on .
Surfshark
Surfshark’s help pages for unstable connections on Windows and Android suggest changing the protocol, trying other locations, disabling apps that may interfere, such as antivirus software and other VPNs, and switching to a different network. On Android they add turning off battery-saving mode. On Windows they add reinstalling the app, rebooting, removing parental or security controls on your router and setting custom DNS. Both pages also say Surfshark does not support IPv6 and suggest disabling it.
As described by Surfshark Help Center (support.surfshark.com/hc/en-us/articles/360010710460-How-to-fix-unstable-connection-issues-on-Windows), read on .
As described by Surfshark Help Center (support.surfshark.com/hc/en-us/articles/360009860539-How-to-fix-unstable-connection-issues-on-Android), read on .
FAQ
Why does a VPN disconnect when the phone screen locks?
On Android, battery saving can close apps that run in the background, and that can include the VPN app. Set the VPN app’s battery setting to unrestricted, then lock the screen and check that the VPN is still on when you unlock the phone.
Does a kill switch stop the VPN from disconnecting?
No. A kill switch does not prevent drops; it blocks your traffic while the VPN is down, so nothing goes out over your normal connection. Our guide on how to check if your VPN is working shows how to check that it is on.
Is it the VPN or your internet connection?
Disconnect the VPN and open a few websites. If they load normally, the drops come from the VPN side, and the fixes on this page apply. If they do not, the problem is your internet connection.
Can two VPN apps on one device cause drops?
They can. NordVPN and Surfshark both suggest checking for other VPN apps on the device and turning them off. Quit or uninstall the ones you do not use, then test the connection again.
When should you contact your VPN provider?
Contact the provider when the drops continue after you have tried another server, another protocol and the battery and antivirus fixes. Tell the support team what you tried; some apps can also send diagnostic information from their help menu.